Servicing Machine; Storing Machine; Recommended Stock Items - Nobles Frontier 608549 Manual Del Operador Y Piezas

OPERATION

SERVICING MACHINE

ATTENTION: Machine repairs must be performed
by Authorized Personnel only.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Always unplug machine
before servicing.
FOR SAFETY: When servicing machine, use
manufacturer supplied or approved replacement
parts.
To access internal components for repair:
1. Remove screw from lift handle linkage as shown,
0.5 inch wrench required (Figure 10).
FIG. 10
ATTENTION: Make sure tanks are empty before
opening.
2. Remove two hex-head bolts at front of machine,
9/16" wrench required.
3. Hinge tank backwards away from chassis
(Figure 11).
FIG. 11
4. When closing machine, be careful not to pinch
internal hoses or wiring.
8
Home Find... Go To..

STORING MACHINE

1. Before storing machine, be certain to flush tanks
and drain machine of all water.
2. Store machine in a dry area in the upright position
with brush/vacuum head raised off floor.
3. Remove recovery dome to promote air circulation.
ATTENTION: Do not expose to rain. Store indoors.
ATTENTION: If storing machine in freezing
temperatures, be sure that machine, pump and
spraying system are completely drained and dry.
Damage due to freezing temperatures is not
covered by warranty.

RECOMMENDED STOCK ITEMS

Refer to Parts List section for recommended stock
items. Stock Items are clearly identified with a bullet
preceding the parts description. See example below:
Frontiert Carpet Extractor (06–01)