Instruction Manual
b) This machine is not intended for use by people (including
children) with impaired physical, sensory or mental
capabilities, or those lacking experience and knowledge.
c) If the power cord is damaged, it should be replaced by
the manufacturer, authorized agent or qualified person, in
order to prevent risks.
d) Always keep the vacuum cleaner in good working order.
Check for leaks, broken or jammed parts that might affect the
equipment's performance. Vacuum cleaners that are not in
good working order can cause accidents.
e) Never leave the equipment operating unattended.
Vacuum cleaners can be hazardous when operating on their
own.
f) Check the electrical current voltage before connecting
the vacuum cleaner. Voltage other than that indicated on the
product can burn out the equipment.
g) Never remove the upper part of the vacuum cleaner
with the motor running. This procedure could cause a work
accident. Always turn the vacuum cleaner off to remove the
upper part.
h) Never suction flammable liquids or gases. Suctioning
flammable products can lead to an explosion and serious
accidents.
Maintenance service for a potential
vacuum cleaner malfunction
Following are some tips for vacuum cleaner maintenance.
In case of questions, find an authorized technical support
and request maintenance for the appliance. Always use
original parts. This ensures that the safety of your equipment is
maintained.
a) The vacuum cleaner won't turn on
- Make sure the plug and socket are connected properly to the
main.
- Check whether the voltage supplied by the mains is sufficient to
power the vacuum cleaner.
- Check whether the on/off button is in the right position.
b) The vacuum cleaner has no suction force
- Check the filter for dirt and clean it if necessary.
- Make sure the hose is not punctured or obstructed, and clean
or replace it if necessary.
- Make sure the accessories are not punctured or obstructed,
and clean or replace them if necessary.
c) The force diminished abruptly
- Check to see if the tank is full, and clean it if necessary.
Electrical Safety of the Equipment
a) This vacuum cleaner is double insulated, so it does not
require a plug with a grounding pin.
Double insulation – Class II
b) Always check whether the rated mains voltage matches
the voltage indicated on the equipment's nameplate.
c) Machine switch. The vacuum cleaner's switch prevents
unintentional operation.
Instructions for Operations with
Vacuum Cleaners
1. Assembling the flexible hose
Connect the flexible hose to the front fitting on the vacuum
cleaner's tank until it snaps into place. To remove the hose, press
the button and pull the hose out.
44983 - 2400 W Wet and Dry Vacuum Cleaner
19