Care & Maintenance
Maintenance Precautions
Always use genuine parts to keep your warranty from being voided.
If the filter, extension rod, or high torque brush bar becomes clogged, the
vacuum cleaner will stop working shortly. To restore its functionality, clean
the clogged component.
If the vacuum cleaner will not be used for an extended period, fully charge
it and disconnect it from the power then store it in a cool, low-humidity
environment away from direct sunlight. To avoid over-discharging the battery,
recharge the vacuum cleaner at least once every three months.
Cleaning the Vacuum Cleaner
Wipe the vacuum cleaner with a soft, dry cloth.
8
Cleaning the Dust Compartment, Pre-filter, and Cyclone
Assembly
1. The vacuum cleaner's cleaning ability will be reduced if the dust
compartment is filled to the "MAX" mark. To regain performance, empty the
dust compartment in a timely manner. Before emptying the compartment,
make sure the vacuum cleaner is disconnected from the power, and do not
press its power button.