Allmatic B.RO MINI 1CH Manual Del Usuario página 11

1. GENERAL SAFETY WARNINGS
WARNING!
Before installing the product it is mandatory to read the document related to the GENERAL SAFETY WARNINGS
accompanying the product. Document 6-1620001. The additional sheet can also be downloaded from www.
allmatic.com.
2. DESCRIPTION AND TECHNICAL CHARACTERISTICS
The B.RO MINI 1CH is a miniaturized Rolling Code receiver programmable with single voltage-free contact relay output, already
equipped with 30 cm long cables. In the B.RO MINI 1CH it is possible to configure the relay output in 3 different modes of use:
"toggle" mode, immediate and timed.
INDICATOR LED
LEARNING BUTTON
RELAY OUTPUT
TECHNICAL CHARACTERISTICS
Power Supply
Consumption
Contact relay Normally Open
Radio coding
Frequency
Max transmitters can be stored
Max range (in open field)
Operating temperature
ATTENTION!
The maximum range is affected by the type of transmitter and antenna in use. In addition, the range can vary signifi-
cantly in the presence of metal parts, in the presence of shielding between the device and the transmitter in use or in
the presence of other devices that communicate at the same radio frequency.
6-1620051M - rev.9 - 22/05/2023
12-24
Vac / Vdc
+ -
12-24 Vac/Vdc
45mA dc - 85mA ac @ 12V
50mA dc - 100mA ac @ 24V
1A @ 30Vdc MAX
0,5A @ 42,4Vac MAX
Rolling Code Allmatic
433.92 MHz
1000
250 m
-10 ... +55 °C
ANTENNA
RADIO MODULE
POWER SUPPLY
English - 3