JBL SA550 Classic Guia De Inicio Rapido página 5

Specifications
Continuous power output (0.5% THD), per channel
Both channels, 8 , 20Hz—20kHz
Both channels, 4 , at 1kHz
Harmonic distortion, 80% power, 8 at 1kHz
Phono Input
Phono Input
Input sensitivity at 1kHz
Input impedance
Frequency response (ref. RIAA curve)
Signal/Noise ratio (A-wtd) 50W, ref. 5mV input
Overload margin, ref. 5mV at 1kHz
Line Inputs
Nominal sensitivity
Input impedance
Maximum input
Frequency response
Signal/Noise ratio (A-wtd) 50W, ref. 1V input
Digital Inputs
DAC
Frequency response
Supported sample rates
Bit depth
Total harmonics distortion + Noise
Signal/Noise ratio (A-wtd)
Pre-amplifier output
Nominal output level
Output impedance
Headphone output
Load range
Output impedance
Maximum output level into 600
General
Mains voltage
Maximum power consumption
Dimensions in mm (including feet, control knob and
connectors)
Weight (net)
Weight (gross)
The SA550 is designed to run warm in
normal use, however extended use at high
volume levels can result in the amplifier
casework becoming hot to the touch.
Pg 5 JBL SA550 Classic QSG
90W
150W
0.002%
Moving Magnet (MM)
5mV
47k + 100pF
20Hz – 20kHz ± 1dB
80dB
21dB
1V
10k
6Vrms
20Hz – 20kHz ± 0.2dB
106dB
ESS9038K2M
20Hz - 20kHz ± 0.05dB
Optical 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
Coaxial 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
16-bit – 24-bit
0.0007%
115dB
630mV
230
16 – 2k
1
5Vrms
100V or 110–120V or 220–240V, 50–60Hz
500W
448 W x 124 H x 321 D
11.2kg
14.0kg
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade
names are those of their respective owners.