Publicidad
Idiomas disponibles
Idiomas disponibles
System Settings
Tap and hold
for 3 sec, on the control panel, and then Turn the dial knob to
change various settings for your oven.
Please refer to the following table for detailed descriptions.
System Setting
Wi-Fi
Set the WI-FI mode to On/Off.
NOTE
See page 49.
Language
Select a preferred language from English or French.
Temp. Unit
Set the oven control to display temperatures in
Fahrenheit or Centigrade.
Calibrate Temp
Recalibrate the oven temperature.
My Pattern
This function remembers and stores the cook settings.
Welcome Lighting
Set the Welcome Lighting mode to On/Off.
Virtual Flame
TM
Set the Virtual Flame
Demo mode
Used by retailers for display purposes only.
Reset
Reset the your setting. (More Functions, Systerm
settings)
Language
Select a preferred language from English, or French. You can not change the
language during cooking.
1.
Tap and hold
for 3 sec.
2.
Select the Language using the dial knob.
3.
Turn the dial knob to select the Language and push to save the changes.
Description
TM
function to On/Off.
Temp. Unit (°F / °C)
Change the temperature format of the oven to Fahrenheit or Celsius. The default is
Fahrenheit.
1.
Tap and hold
for 3 sec.
Select Temp. Unit using the dial knob.
2.
3.
Turn the dial knob to select unit and push to save the changes.
Calibrate Temp
The oven temperature has been calibrated at the factory. When first using the
oven, follow the recommended recipe times and temperatures. If it appears that
the oven is too hot or too cool, you can recalibrate the oven temperature. Before
recalibrating, test a recipe by using a temperature setting that is higher or lower
than recommended. The baking results should help you decide how much of an
adjustment is needed. The oven temperature can be adjusted by ±35 °F (±19 °C).
1.
Tap and hold
for 3 sec.
2.
Select Calibrate Temp using the dial knob.
Turn the dial knob to adjust temperature value.
3.
4.
Push the dial knob to save the changes.
NOTE
This adjustment does not affect the broiling or the self-cleaning temperature, and
is retained in memory after a power failure.
My Pattern
This function remembers and stores the cook settings frequently used by the user.
1.
Tap and hold
for 3 sec.
Select My Pattern using the dial knob.
2.
3.
Turn the dial knob to select On/Off and push to save the changes.
English 47
Publicidad
