Publicidad
Idiomas disponibles
Idiomas disponibles
Displayed
Possible cause
code
The sub PCB sensor is open
when the oven is operating.
C-22
There is a short in the sub PCB
sensor.
The temperature probe sensor
is short when the oven is
C-23
operating.
The main PCB sensor is open
when the oven is operating.
C-30
There is a short in the main PCB
sensor.
This code occurs if the PCB
C-31
temperature rises abnormally
high.
Bad line
This error message appears
if the power cord is installed
improperly.
C-A2
This code occurs if the sub PCB
temperature rises abnormanlly
high.
Solution
Press OFF, and then restart
the oven. If the problem
persists, disconnect all power
to the range for at least 30
seconds and then reconnect
the power. If this does not
solve the problem, call for
service.
Call for service
If the power connection is
plugged in improperly, that
code appears on the display.
Reconnect the power
connection properly, and the
message disappears.
Press OFF.
Check the oven vent and
cooling vent. If the vent is
closed, never block the vent
by anything. After cooling the
oven, restart the oven.
If this does not solve the
problem, call for service.
COOKTOP
Displayed code
Possible cause
This code occurs if communication
between the Main and Inverter PBA
is interrupted.
The top sensor is open when the
burner is operating.
The top sensor is short when the
burner is operating.
The IGBT sensor is open when the
burner is operating.
The IGBT sensor is short when the
burner is operating.
This code occurs if the DC fan motor
is open or locked.
Displayed if the cookware on an
element is unsuitable or too small
or no cookware has been placed on
the cooking zone.
Solution
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
disconnect all power to
the range for at least
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
Call for service
Check the cookware
English 65
Publicidad
