Domo DO733K Manual De Instrucciones página 39

· Be careful while pouring, the coffee is hot right after brewing.
· For safety reasons it is considered wise to keep the lid on the carafe. This way the coffee also stays
warm.
· If you want to activate standby mode manually, press and hold the power button [ON/OFF].
· You can switch on a machine that has deactivated itself by pressing the on-off button.
MAKING COFFEE 'TO GO'
1. Open the lid of the machine and fill the water reservoir with water for at least 4
cups using the glass coffee pot.
2. Insert a paper filter (size 4) into the filter holder. Or use the included reusable
filter.
3. Add the desired amount of ground coffee to the filter. Close the lid.
4. Place the cup plate on the hot plate. Unscrew the lid from the cup and place
the cup on the cup plate.
5. Plug the power cord into the outlet and press the on/off button [ON/OFF].
6. The cup quantity defaults to 4 cups, the maximum quantity for this cup.
7. Press the coffee strength button [Strong] to set the strength:
· No bar = mild, this is the standard setting
· = medium
· = strong
When a custom coffee strength is selected, the water will flow more slowly. The process of
brewing coffee will take longer as a result.
8. Press the [ON/OFF] button. The indicator lamp lights up in red and coffee will start to flow.
9. When your coffee is ready, you will hear a signal and the red indicator light on the display
disappears.
10. Wait another 60 seconds and carefully remove the cup from the machine. Keep the cup upright
while removing it. Screw the lid back on the cup.
11. Make sure the lid of the cup is closed. Your coffee is now "to go". Open the drinking spout to drink.
· The iced coffee function and timer function are not available for a coffee "to go".
· After use, you can stow away the cup plate using the hook at the back of the machine.
www.domo-elektro.be
39
DO733K