Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
EN
1.
Smart Led Screen with
electronic temperature control
2.
Mode button
3.
Steam trigger
4.
Cord
5.
Handle
STEAMFORCE PRO, CONCENTRATED INNOVATION...
Innovative Steam Power Control technology provides stunning results with flawless
precision.
Let's break the rules of performance. The powerful pump system inspired by Rowenta's
line of steam stations provides up to 2,5X more steam into the fabric* to achieve perfect
results. The Steam Power Control Technology allows perfect control over the steam
power. A smart trigger enables you to control the amount of steam and activate it only
when you need, for a personal experience.
Smart control panel has 5 pre-settings for different fabric types. Smart controls will
automatically adapt to a precise temperature of the soleplate and steam output. There's
no need to worry about burning your fabrics.
* compared to an iron with no pump, Rowenta DW52xx/DW53xx
BEFORE USE
Please read carefully the "Safety and use instructions" booklet before first use.
USE
1 • Filling the water tank
• Before filling the water tank, unplug the iron
• Open the water filling inlet
fig
filling inlet and return the iron to the horizontal position.
• You can plug in your iron
fig 4
2 • Setting the temperature
Your iron is equipped with the Autosteam Electronic Control function, it automatically
adjusts the steam amount and the temperature based on the selected fabric for
optimum results. Select the fabric to be ironed by pressing the MODE button to
select the appropriate fabric.
fig
fabric has been pre-defined.
When your iron reaches the required temperature, the selected fabric in the LED
screen stops flashing and is displayed constantly
6.
Water tank
7.
High precision tip
8.
Soleplate
9.
Filling inlet
10.
Rear cover
fig
1.
2. Fill in water up to the Max. mark.
.
5. For perfect results, an optimum position for each
fig
6. You can start ironing.
4
IMPORTANT The iron takes longer to cool down than to heat up. We recommend
that you start with fabrics to be ironed at a low temperature. For mixed fabrics set the
temperature for the most delicate fabric.
TIP: Always spray starch onto the reverse side of the fabric to be ironed.
3 • Dry ironing
3. Close the
fig
For dry ironing, do not press the steam trigger. Ideal for delicates or perfect finishing.
4 • Steam ironing
This iron is equipped with an on-demand steam trigger so you can activate the steam only
when needed and control the steam output according to your needs.
To start the steam output, press continuously the trigger to the first level
SCREEN
FABRIC
INDICATION
nylon (Synthetic
NYLON
fibres, e.g. viscose,
polyester)
SILK
silk
WOOL
wool
COTTON
cotton
LINEN
linen
5
EN
IRONING LABEL
fig 7-a or
below.
Publicidad
