Worx WX426 Manual De Instrucciones página 13

Wood
Aluminum
Recommended
maximum PVC pipe
material (diameter)
thickness
Tile
Sheet steel
Laser battery model no
Spindle thread size
TCT blade
Saw blade
HSS blade
thickness
Abrasive
cutting disc
Protection class
Bare tool weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K & K
PA WA
Wear ear protection.
VIBRATION INFORMATION
(CUTTING WOOD/CUTTING
METAL)
Vibration total values (triax vector sum)
determined according to EN 62841:
Cutting wood: a
Vibration
Uncertainty K = 1.5m/s²
emission
Cutting metal: a
value:
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
Electric Circular Saw
27mm
3mm
on the ways in which the tool is used especially what
kind of workpiece is processed dependant on the
13mm
following examples and other variations on how the
tool is used:
8mm How the tool is used and the materials being cut or
drilled.
0.91mm
The tool being in good condition and well
maintained.
LR44 1.5 The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
M6
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
0.8mm
And the tool is being used as intended by its design
and these instructions.
0.65mm
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
0.8mm
/ll
1.8kg
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
L : 87dB(A)
Always use sharp chisels, drills and blades.
pA
Maintain this tool in accordance with these
L : 98dB(A)
wA
instructions and keep well lubricated (where
3.0dB(A) appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
VIBRATION INFORMATION
(CUTTING TILE)
2
= 5.31m/s
h,W
= 4.65m/s 2
h,M
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
ways in which the tool is used dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
WARNING: The vibration and noise
emissions during actual use of the power tool
can differ from the declared value depending
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
Vibration total values (triax vector sum)
determined according to EN 60745:
Vibration Cutting tile: a
emission
Uncertainty K = 1.5m/s²
value:
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the
= 6.01m/s 2
h
EN
13