Domo DO445BL Manual De Instrucciones página 33

www.domo-elektro.be
4. Place the food to be mixed in the glass jug.
5. Place the lid on the glass jug and place the glass jug on the motor case. Place the
measuring cup in the lid.
6. Plug in the blender.
7. Turn the speed control to the positione 1 or 2. Position 1 is for light liquids and 2
for thicker liquids and solid foods.
8. With the Pulse position you can blend with short, controlled pulses. Turn the
speed control to the Pulse position and hold down. Release the button to stop
mixing. The speed control will automatically return to position 0.
KNIFE ASSEMBLY
Removing the knives
ONLY REMOVE THE KNIVES WHEN ABSOLUTELY NECESSARY!
Remove the knives from the jug by turning the blade support in a counterclockwise
direction.
Place the whole on a flat surface to facilitate the removal. Place a thick cloth over the
knives and pull them out straight.
The knives are very sharp. Be extremely careful when you touch them.
To replace the knives
First place the seal onto the bottom of the jug. Then place the knives on top and close
off with the blade support by turning it clockwise until it is tightly sealed.
IMPORTANT
If the knives are not installed correctly, the appliance will produce more noise.
CLEANING
Jug
Empty the jug and fill it with water. Place the jug on the motor case and turn the speed
control several times to the 'Pulse' position (hold the speed control knob). Empty the
jug and repeat this process until the jug is clean.
Knives
Clean the surface of the knives with clean soapy water. Do not let the knives soak
33
DO445BL