Domo DO8121 Manual De Instrucciones página 23

DO8121
pARTS NAME
3
1. Speed control
2. oscillation switch
2
3. timer
1
HOW TO uSE
to adjust the speed, move the speed control to the required position :
0 : to stop
1 : slow
2 : medium
3 : fast
OSCILLATION
the oscillation of the tower ventilator is controlled by the oscillation switch. turn the
switch to start or stop the oscillation.
the oscillation cannot operate when the speed control is at "0".
TIMER
Press the timer switch, it will pop up. adjust to the time desired, the ventilator will
stop at the end of this time. the timer can be set for up to 120 min.
to start the timer put the control to the time selected on the minutes dial
15,35,45,60,... etc.
to use the ventilator without the timer put the time control to postion "on".
to stop the timer before the time is up, simply press the timer knob down.
CLEANING
Use a soft tissue or cloth to clean. in case dirt or grime does not come off easily, use
soapy water. do not use benzine thinner or other solvents.
23