Whirlpool WFC 3C33 PF X Guía Rápida página 2

OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.
MULTIZONE - If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and detergent. By default the
appliance washes dishes in all racks.
-
KEYLOCK A long press (for 3 seconds) of TURBO button, will activate
the KEYLOCK function. To deactivate the KEYLOCK, long press again.
NaturalDry It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe to
your kitchen furniture.
LOADING THE RACKS
CUTLERY RACK
(loading example for the
cutlery rack)
The third rack was desi-
gned to house the cutlery.
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
1 2
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
TROUBLESHOOTING
PROBLEMS POSSIBLE CAUSES
The dishwasher does
No water in the water supply or the tap is closed.
not fill the water.
Display shows:
The inlet hose is bent.
and F6, both On/
Off and START/Pause
The sieve in the water inlet hose is clogged; it is
LEDs are blinking
necessary to clean it.
rapidly.
Dishwasher finishes
Drain hose positioned too low or siphoning into
the cycle prematurely.
home sewage system.
Display shows: F15
and both On/Off and
Air in water supply.
START/Pause LEDs are
blinking rapidly.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.whirlpool.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
2
UPPER RACK
flaps with
adjustable
(loading example for the
upper rack)
Load delicate and light
dishes: glasses, cups, sa-
ucers, low salad bowls.
3
B
A
C
Please scan the QR code on your product in order to have more detailed information.
POWER CLEAN - Thanks to the additional power jets this option provides
a more intensive and powerful wash in the lower rack, in the specific area.
This option is recommended for washing pots and casseroles.
TABLET (Tab)- If you use powder or liquid detergent, this option
should be off.
-
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours
The DELAY function cannot be set once a wash cycle has been started.
LOWER RACK
Foldable
position
POWER CLEAN
Power Clean uses the special water jets in the rear of cavity to wash more in-
tensively the high dirty items. The lower rack has a Space Zone, a special pull-
-out support in the rear of the rack that can be used to support frying pans or
baking pans in upright position, thus taking up less space.
Placing the pots/casseroles faced to the Power Clean®
component please activate the POWER CLEAN on the
panel.
More information in the Daily Reference Guide on the website.
CLEANING THE SPRAY ARMS
4
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure there is water in the water supply or the tap running.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and
reboot.
After having carried out the verification and cleaning, turn off and turn on the dishwasher
and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION).Check for siphoning
into home sewage system, install air admittance valve if necessary.
Check water supply for leaks or other issues letting air inside.
CAPACITY: 14 standard place-settings
For pots, lids, plates, salad bowls, cutlery etc.
Large plates and lids should ideally be placed at
the sides to avoid interferences with the spray
arm.
The lower rack has tip-up supports which can
be used in a vertical position when arranging
plates or in a horizontal position (lower) to load
pans and salad bowls easily.
(loading example for the lower rack)
The lower spray arm may
be removed by pulling it
upwards.
:
400011639701C
08/2022 dk - Xerox Fabriano
IEC 436