Publicidad
Idiomas disponibles
Idiomas disponibles
D
D
Useful information
Informations pratiques
1
Rear glass panel
2
*
Interior glass panel (this may not be available on your product.)
4. If your appliance has an interior glass panel (2), repeat this process to remove it.
5. The first step in reassembling the door is to refit the interior glass panel (2). Place the
chamfered corner of the glass panel so that it fits into the chamfered corner of the plastic
notch. (If your appliance has an interior glass panel). The interior glass panel (2) must be
fitted in the plastic notch, near the rear glass panel (1).
6. When fitting the rear glass panel (1), make sure the printed side of the panel is facing the
second glass panel. It is important to insert the lower corners of the rear glass panel (1) into
the lower plastic notch.
7. Push the plastic part into the frame until you hear a "click".
Replacing the light bulb
Before replacing the oven light bulb, make sure that
the appliance is unplugged from the power supply and
that it is cool to avoid any risk of an electric shock. The
hot surfaces can cause burns!
The oven bulb is a special electric light bulb capable
of withstanding temperatures up to 300°C. For more
details, see the Technical Specifications. Oven bulbs
are available from your authorised technician.
The location of the lamp may vary from the illustration.
The bulb used in this fixture is not suitable for lighting
a room in a home. This bulb is meant to help the user
distinguish between different types of food.
44
44
EN
FR
D
D
Useful information
Informations pratiques
The bulbs used in this appliance must withstand
extreme physical conditions such as temperatures
exceeding 300°C.
If your oven has a round lamp:
1. Unplug the appliance from the power supply.
2. Unscrew the bulb cover by turning it anticlockwise to remove it.
3. If your oven has a type (A) light as shown in the diagram below, remove it by turning it as
shown, before replacing it. If, on the other hand, it has a type (B) light, pull it to remove it, as
shown in the diagram, before replacing it.
4. Replace the bulb cover.
45
45
EN
FR
Publicidad
