Publicidad
dryer stands on a central pole, approx. 50 cm above the ground.
We suggest that you enter the inspection number right here. In
order to maintain the high quality of your Linomatic for the long
term, please follow the care instructions. Read through these
instructions carefully and keep them in a safe place together with
the sales receipt.
Inspection number
B
C
A_Linomatic_Plus.indd 8
Working heigt:
Adjust the rotary washing line to the desired height prior
to first use. In order to do this, open the arms slightly and
push the upper button. Then click to the desired working
height.
[1] Find a sunny spot and bear in mind any surrounding
trees, shrubs and fences, etc. so the rotary dryer can
rotate freely. The space requirements are provided on
the packaging.
[2] Dig a hole according to the diagram. Mix approx. 20
litres (2 buckets) of concrete with some water (earth-
moist) in a ratio of 5 parts sand to 1 part cement and fill
up the hole.
Hold the ground socket upright.
Test the rotary dryer with a spirit level.
Only use the original Leifheit ground socket provided by
the manufacturer.
The socket should protrude slightly out of the ground so
that the cover can be closed.
Let the concrete set for a few days.
[3] Check whether the rotary dryer is correctly positioned
in the ground socket. When setting up the rotary dryer,
the bottom of the three holes in the slot of the central
pole must be covered by the upper edge of the ground
socket. Or the central pole must be sunk at least 21.5 cm
into the ground socket.
14.10.22 15:1
Publicidad
