to replace the door
1. Make sure hinge arms are
unlocked and in the removal
position.
2. Firmly grasp both sides of the door.
3. While supporting the oven door, insert both door
hinge arms into the slots in the bottom sides of
the door frame. When the door is held at about 5
degrees, the hinge arms will slide in and down.
4. Completely open the oven door. If the
door will not fully open, the hinge arms are
not correctly inserted into the slots in the
bottom of the door.
5. Lock both hinge locks. Push each lock up
against the front frame of the oven cavity.
6. Close the door.
7. Reconnect power to the range.
maintaining your appliance _69
Hinge
lock