actually induce noise into adjacent circuits since all of the system's
components are joined at the power strip's AC outlets. The PST-
8D employs additional ultra-sonic filtering for both digital and
video components. This additional filtering assures peak system
performance by preventing AC noise or back-wash from cross-
contaminating an adjacent unit. For example, a television plugged
into the digital – video filtered outlets will not affect an audio receiver-
controller connected to one of the PST-8D's standard or delayed
outlets.
Telco – Satellite – Cable Transient Voltage Surge Suppressors:
The PST-8D features transient voltage surge suppression for both
standard telephone lines, as well as cable and satellite lines utilizing
standard coaxial connectors. As these surge suppressors are in-
line, they will require an additional cable to connect from their output
to the control device requiring protection.
All in-line surge suppressors feature our exclusive ground
contamination free technology.
This aids in eliminating audio
buzzing, and the video hum-bars that can result from typical in-line
suppressors. Further, our cable and satellite suppressors are TIVO
friendly as well as HD-Digital Television ready. Both DC carrier
signals as well as high bandwidth signals can pass through our
circuit. In fact the bandwidth is less than 0.1dB loss at 1GHz!
To connect your cabling to these in-line protectors, simply follow the
in and out indications marked next to the Telco, Cable and Satellite
connectors.