Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Assembly/Disassembly
To assemble
Connect the dust cup lid to the unit's body by pushing until it clicks into place.
Insert the flexible hose into the hose-connecting inlet on the unit's body until it clicks
into place.
Insert the metal tube into the flexible hose.
To adjust the length of the metal tube, push the pushbutton backwards and extend the tube.
Attach one of the following accessories by inserting it into the metal tube or flexible hose.
•
Floor brush for various types of flooring.
Press the pedal to retract the brush (for carpets) or extend it (for smooth floors).
−
•
Mini turbo brush for furniture.
•
Long crevice tool for hard-to-reach places.
Insert the plug into the mains socket.
•
The power cable can be extended up to the yellow mark. If the red mark is visible, then
you have pulled the cable out too far.
To disassemble
•
Make sure the unit is turned off and disconnect the plug from the mains socket.
•
Detach the brushes, crevice tool and metal tube by twisting to pull them apart.
To remove the flexible hose, press the hose release button and pull out the hose.
Press the cable rewind button to store the cable away.
Insert the floor brush into the back of the unit for easy storage.
Operation
•
Once the unit is assembled and plugged in, it is ready for use.
Press the ON/OFF button to turn the unit on or off.
Press the + or - button to increase or decrease the level of suction.
Use the handle to carry the vacuum.
14
EN
Publicidad
