Grandstream GWN7661 Guía De Instalación Rápida página 3

OVERVIEW
EN
The GWN7661 is an in-wall Wi-Fi 6 (802.11ax) access point designed for
small-to-medium sized businesses, offices, residential, commercial loca-
tions, hotels and more. It provides three Gigabit network ports to provide
IP phones, IPTV, computers and similar devices with Ethernet while also
providing and uplink Gigabit network port with PoE/PoE+. The GWN7661
offers 2×2:2 MU-MIMO technology and a sophisticated antenna design
for maximum network throughput and expanded Wi-Fi coverage range.
To ensure easy installation and management, the GWN7661 uses a con-
troller-less distributed network management design in which the control-
ler is embedded within the product's web user interface. The GWN7661
is also supported by GWN.Cloud and GWN Manager, Grandstream's free
cloud and on-premise Wi-Fi management platform. It is the ideal Wi-Fi
AP for voice-over-Wi-Fi deployments and offers a seamless connection
with Grandstream's Wi-Fi capable IP phones. With support for advanced
QoS, low-latency real-time applications, mesh networks, captive portals
and 500+ concurrent clients per AP, the GWN7661 is an ideal Wi-Fi ac-
cess point for medium wireless network deployments with medium user
density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -10 °C to
50 °C for operating and -30 °C to 60 °C for storage.
• Do not expose the GWN7661 to environments outside of the follow-
ing humidity range: 5-95% RH (non-condensing).
• Do not power cycle your GWN7661 during system boot up or firm-
ware upgrade. You may corrupt firmware images and cause the unit
to malfunction.
PACKAGE CONTENTS
1x GWN7661 Access Point
2x Screws
1x Screw
(PM2.5*6*4mm)
(KB 2.6*6)
4x Screws
1 x Quick
(KB 3.5 * 26)
Installation Guide
~1~
GWN7661 PORTS
Port Description
PoE IN Ethernet RJ45 port (10/100/1000Mbps) supporting PoE/PoE+.
LAN 1 1x 10/100/1000Mbps Ethernet port.
LAN 2 2x 10/100/1000Mbps Ethernet ports with PSE.
LAN 3
Notes:
• PSE maximum output per port is 6W.
• Only if powered by PoE+, both LAN 2(PoE OUT -B) and LAN
3(PoE OUT -A) can be used as PSE.
RESET Factory reset pinhole.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7661
GWN7661 can only be powered on using PoE/PoE+ switch using following
steps :
Step 1: Plug a RJ45 Ethernet cable into the PoE IN network port of
GWN7661.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch