Grandstream GWN7661 Guía De Instalación Rápida página 4

HARDWARE INSTALLATION
GWN7661 can be mounted on the wall, Please refer to the following
steps for the appropriate installation.
Wall Mount
1. Use a measuring tape to measure the distance between the four
wall mount slots on the back of the GWN7661 access point and use
a pencil to mark the mounting screw holes on the wall.
2. Drill the holes in the spots that you have marked, then attach the
wall mount to the wall via the wall mount slots.
3. Use the black screws to mount the GWN7661 main body on the wall
mount after mounting the wall mount on the wall.
Wall
Mount Slots
1
4. Attach the front cover with the GWN7661 body and then the grey
screw on the side.
1 screw
Screw
(KB 2.6*6)
(KB 2.6*6)
3
CONNECT TO GWN7661 DEFAULT Wi-Fi NETWORK
GWN7661 can be used as standalone access point out of box, or after
factory reset with Wi-Fi enabled by default.
Wall
Screws
2
(PM2.5*6*4mm)
Wall
4
2
~3~
After powering the GWN7661 and connecting it to the network, GWN7661
will broadcast a default SSID based on its MAC address GWN[MAC's
last 6 digits] and a random password.
Note: GWN7661's default SSID and password information are printed
on the MAC tag of the unit.
ACCESSING THE CONFIGURATION INTERFACE
A computer connected to the GWN7661's SSID, or to the same network
as the GWN7661 can discover and access its configuration interface
using one of the below methods:
Method 1: Discover GWN7661 using its MAC Address
1. Locate the MAC address on the MAC tag of the unit, which is on the
underside of the device, or on the package.
2. From a computer connected to same network as the GWN7661,
type in following address using GWN7661's MAC address on your
browser https://gwn_<mac>.local
Example: If a GWN7661 has the MAC address C0:74:AD:8C:4D:F8, this
unit can be accessed by typing https://gwn_c074ad8c4df8.local on
the browser.
Method 2: Discover GWN7661 using GWN Discovery Tool
1. Download and install GWN Discovery Tool from the following link:
https://www.grandstream.com/tools/GWNDiscoveryTool.zip
2. Open the GWN DiscoveryTool, and click on Scan.
3. The tool will discover all GWN76XX Access Points connected on
the network showing their MAC and IP addresses.
~4~