Uda 16 Tl (Optional, Not Included); Connection - Work Pro W UDA SERIE Manual De Usuario

UDA SERIES: UDA 1, UDA 2, UDA 4
USER MANUAL / MANUAL DE USUARIO
VERSION 1.0

UDA 16 TL (Optional, not included)

UDA 16 TL is an optional accessory (not included) that allows for high impedance connection of the
UDA loudspeakers. It houses a high quality 120Wrms@100V line transformer (60Wrms@70V) that
makes it suitable for installations where long cables must be deployed
5.3.1.

Connection

To connect one UDA 16 TL to all UDA series loudspeakers, remove the metallic cover on the rear side
of the UDA 16 TL, get loose the nut of the cable gland and insert the cable. Then connect the amplifier
output to the terminals labeled "IN 100V", and the UDA unit to the terminals labeled "OUT 8 ohm" as
can be seen in the picture, paying attention to the polarity. To finish attach the metallic cover in place
and screw the nut of the cable gland again.
UDA SERIES
UDA 1, UDA 2, UDA 4
UDA 16 TL
Power (70V/100V) 60W / 120W
Dimensions (WxHxD) 105 x 150 x 112 mm
Weight 3.1 kg
UDA 16 TL can be used in all UDA series.
www.workpro.es 9