Publicidad
Idiomas disponibles
Idiomas disponibles
3. Getting started:
•
Unscrew the battery compartment screw
•
Insert all two AA batteries respecting the polarity
•
Close the lid and tighten the screw.
•
Start the instrument by pressing the red ON/OFF button
Anytime when the screen below is displayed, press any button to start
measuring speeds or distances. The device will be ready to start measuring,
with the laser or with the contact accessories. For this reason, do not direct it
at people or animals.
The device will start at the function that was set most recently, as well as the
last units used.
Please follow the steps below when setting up the device:
Direct the device at a moving object and use the desired mode: measuring
speeds or distances.
4. General usage
The tachometer offers four different menus to operate it. By pressing the
left button (button 1), the tachometer moves from one menu to the next.
Symbol
Name
Rotational speed
Linear speed
Distance
Setting
The first time you switch ON the tachometer, you will be asked to select the
units you prefer: metric or imperial. You can always change it later in the
setting menu.
12 EN
Description
Rotational speed menu with the laser or with
contact tips.
The Speed mode is activated automatically
when contact or laser signal is detected.
Linear speed menu to be used only with wheels.
Make sure to select the right wheel size in order
to have the right unit.
Distance menu to be used only with wheels.
Make sure to select the right wheel in order to
have the right unit
Menu to change the settings of the tachometer
to the preferences of the operator.
Publicidad
