Daikin FWB-C Instrucciones De Montaje página 8

FACTORY MOUNTED KIT VALVES
The kit valves are available in different configurations:
• ON/OFF or MODULATING motor driven 2-way valve (table
1 page 89)
• ON/OFF or MODULATING motor driven 3-way valve (table
2 page 89)
• Pressure indipendent ON/OFF motor driven 2-way valve
(refer to Pressure independent manual FC66006204)
connected to the control panel for FWB-C fan coils, control the
room temperature by stopping the water flow through the heat
exchanger.
The kit includes:
• valve
• electrothermal actuator
• plumbing kits for installing the valve on the heat exchanger.
For Kv and hydraulic characteristics of 2, 3 way valves refer to
tables 3-4-5 page 90.
For other information refer to specific technical manual.
Factory mounted 2 way kit valve
Factory mounted 3 way kit valve: 1) On mode ; 2) By-Pass mode
1
OUTLET COIL
INLET VALVE
8
FWB-C
Factory mounted 3 way kit valve
OUTLET VALVE
INLET VALVE
INLET COIL
2
OUTLET VALVE