Publicidad
Idiomas disponibles
Idiomas disponibles
3. Attach handle to door using the provided handle
and bolts. (See Figure 5)
Figure 5
ATTACHING THE ROOF
1.
If assembling a four-sided room, proceed to step 2.
a. Mount wall brackets. Top of wall bracket should
be level with top of wall panels. (See Figure 6)
Figure 6
4' Wall
Bracket
NOTE: Wall bracket mounting hardware is not
included. Hardware will vary depending on
wall material.
NOTE: When assembling wall brackets on a
two-sided room, brackets will overlap in corner.
(See Figure 7)
Wall
Figure 7
PAGE 3 OF 12
INSTALLATION CONTINUED
4' Wall
Bracket
Wall
Wall
2. If assembling an 8 x 8' room, proceed to part C.
a. Using beam connector, bolt together two roof
beams. Using a 15 mm wrench, fully tighten bolts.
(See Figure 8)
Figure 8
b. Using a 12 mm wrench, tighten screws on
beam connector. (See Figure 9)
Beam
Figure 9
c. Using provided bolts, attach roof beam to posts
on mounted room. Thread bolts through outside
of post into pre-threaded roof beam. Fully
tighten bolts. (See Figure 10)
Figure 10
NOTE: The number of roof beams will differ
depending on the room size.
Beam Connector
Beam
Beam
Connector
Post
Roof
Beam
0523 IH-8305
Publicidad
