Publicidad
Idiomas disponibles
Idiomas disponibles
Care and Cleaning
Your sink is manufactured with the highest grade stainless steel and will provide you many years of
enjoyment with the proper care .
Do:
- After use, always rinse your sink with tap
water to dilute and remove deposits .
- Towel dry the sink after use whenever
possible to prevent water spots . Should
water spots occur, clean with a mild
solution of vinegar and water followed by a
thorough rinse .
- Use liquid soap, a general household
cleaner, or a weak solution of vinegar and
water for regular cleaning .
- Only use plastic scouring pads
recommended for use in stainless steel
sinks, and only use them in the bowl of
the sink . Scrub in the direction of the grain
(original polish lines).
SCRATCH, SPOT, AND BLEMISH REMOVAL AND SURFACE RESTORATION:
Little rust spots and blemishes that periodically appear in the sink are typically the result of the
steel interacting with the chemicals found in the vast spectrum of substances that sinks are
commonly exposed to . They may also get transferred from other objects placed or left in the sink .
Scratches are the result of regular wear and tear .
To remove scratches, spots, and blemishes from the sink, rub them with a non-metallic scouring
pad (e.g. Scotch-Brite
Always rub the surfaces in the direction of the grain of the steel. When finished, rinse the sink with
water and dry it with a towel to allow the sink to form a protective outer layer . This procedure can
also be used to renew all of the surfaces of the sink .
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
) combined with a mild abrasive cleaner (e.g. Vim
®
Do Not:
- Do not allow any food, detergent, soap or
grease to dry or sit for extended periods of
time on the surface of the sink .
- Never use abrasive cleaning products, as
they will dull and scratch the finish.
- Do not use scouring pads on the deck, as
they will dull the finish.
- Never use steel wool pads or leave steel/
cast iron pans in your sink for extended
periods of time, as they will leave iron
particles on the sink, which can cause
corrosion .
- Never use chlorine-based cleaners in your
new sink, they could lead to rust spots
and discolouration . If you must use them,
rinse sink thoroughly with fresh water
immediately after use .
- If any chemicals or glue make contact with
the sink during installation, wipe clean and
rinse thoroughly with fresh water .
15
®
or Barkeeper's Friend
CONGLOMKB .COM
).
®
Publicidad
