Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION - Heating fluids
The steam pipe can be used to froth milk or warm up drinks.
1. Remove the water reservoir from the machine and fill it with water, the water level must not reach
above the marking "MAX". Then place the water reservoir correctly in the machine.
2. Make sure the selection button is in the "
3. Press the ON/OFF switch, the power indication light will light up red.
4. Leave the selection button on the "
machine is at the right temperature when the ready-for-use indication light (3) keeps lighting up white.
5. Fill a can or mug with the liquid to be heated.
6. Immerse the steam pipe into the liquid. Turn the selection button to the "
coming from the steam pipe.
7. When the liquid has reached the desired temperature, you must turn the selection button back to the
"
" position.
8. Press the ON/OFF switch to turn the machine off.
OPERATION - Automatic turn-off
1. If you do not turn the machine off with the ON/OFF switch, the machine will be turned off automatically.
2. If you forget to turn the selection button back to the "
the function will stop working automatically after 90 seconds. The ready-use-indication light will start
blinking.
3. If you forget to turn the selection button back to the "
heating function, this function will stop working automatically after 180 seconds. The ready-for-use
indication light will start blinking.
CLEANING AND MAINTENANCE - Cleaning after use
Thoroughly clean the machine and the individual parts after every use:
1. Pull the plug from the socket.
2. Let the machine and individual parts cool down
3. Clean the water reservoir, drip tray, drip pan, filter holder, and filter with hot water. If the holes in the
filters are plugged, use a needle or toothpick to unplug them.
4. Clean the base and the outside of the water reservoir with a moist cloth.
5. Thoroughly clean the basis.
6. Store the machine in a dry place.
ATTENTION:
•
Make sure the plug of the machine is not plugged in the socket when cleaning.
•
Do not use aggressive or abrasive cleaning agents or sharp objects (such as knives or hard brushes)
when cleaning.
•
Never immerse the basis in water or another fluid.
•
The machine and parts are not suited for the washing machine.
CLEANING AND MAINTENANCE - Descaling
Scaling occurs particularly in areas with hard water. This clogs the filters and the piping in the machine.
Descale the machine regularly.
1. When the power indication light and the ready-for-use alternately blink, this means that the espresso
maker must be cleaned.
2. Fill the water reservoir with water and decalcifier to the "MAX"-level. Read the packaging of the
decalcifier for the exact quantities to be used. Use a "household decalcifier".
3. Place a tray with a content of around 500 ml beneath the filter holder.
4. Turn the selection button to the "
90 seconds.
5. Turn the selection button back to the "
the machine.
" position. Then connect the machine to a power socket.
" position and wait a moment, the machine starts heating up. The
" position after you have made espresso,
" position after you have used the frothing/
" position, the pump starts pumping water and stops after around
" position and leave the decalcifier for minimal 5 minutes in
29
" position, steam is now
EN
Publicidad
