Makita DJV181 Manual De Instrucciones página 12

1
2
3
► 1 . Hex wrench 2. Bolt 3. Fence guide
To install, insert the rip fence into the rectangular hole on the side of
the tool base with the fence guide facing down. Slide the rip fence to
the desired cutting width position, then tighten the bolt to secure it.
2. Circular cuts
1
► 1. Fence guide 2. Threaded knob 3. Circular guide pin
When cutting circles or arcs of 170 mm (6-11/16") or
less in radius, install the rip fence as follows.
1. Insert the rip fence into the rectangular hole on the side of
the base with the fence guide facing up. Insert the circular
guide pin through either of the two holes on the fence guide.
Screw the threaded knob onto the pin to secure the pin.
2. Now slide the rip fence to the desired cutting
radius, and tighten the bolt to secure it in place.
Then move the base all the way forward.
NOTE:
• Always use blades No. B-17, B-18, B-26 or B-27
when cutting circles or arcs.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mended for use with your Makita tool specified
in this manual. The use of any other accessories
or attachments might present a risk of injury to
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Jig saw blades
• Hex wrench 4
• Rip fence (guide rule) set
• Anti-splintering device
• Cover plate
• Dust nozzle assy
• Makita genuine battery and charger
NOTE:
• Some items in the list may be included in the
2
tool package as standard accessories. They
may differ from country to country.
3
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
12 ENGLISH