Julabo PURA 4 Manual De Instrucciones página 32

2.6 h.m.
2.7
2.8
2.9
3
4
5
6
32
Hours, minutes (Indication of the timer)
Edit keys
Temperature setpoint increase or decrease
Press the key briefly for step-by-step changes.
Press and hold the key for fast change of setpoint.
OK key, with two functions
1. Switch the device on/off.
2. Store value / parameter.
MENU key
Right side of the device:
Socket: USB-Host interface (Type B)
control (JULABO EasyEcho) or for firmware update via PC..
Left side of the device:
Drain tap and drain stud (inner tube diameter: 12 mm)
Hood cover
Rear side of the device:
Mains connection: Integrated connector for voltage supply
Mains cable, country-specific.
Only use original JULABO mains cables.
for remote