CEVIK PRO CE-MB18V Manual De Instrucciones página 19

EN
1. INTRODUCTION.
We appreciate the trust placed in our brand and we hope that the mixer you have just purchased will be
very useful to you. Your machine has many features that will make your job faster and easier. Safety,
comfort, reliability were taken as a priority for the design of this tool, which makes maintenance and
operation easy.
This electronic mixer is designed to mix liquids, mortars, adhesive pastes, paints, epoxy resins, cement
and similar products.
The optimum performance of the mixer depends on the density of the product to be used and the
quantity to be mixed. The appropriate gear, speed and rod should be used for each occasion.
2. DESCRIPTION OF THE ELEMENTS.
1 Handle.
2 Battery.
3 Operation button.
4 Engine casing.
3. PICTOGRAMS.
The use of symbols in this manual is intended to draw your attention to potential hazards. The safety symbols and
the explanations that accompany them must be fully understood. Warnings by themselves do not eliminate risks
and cannot replace correct actions to prevent accidents.
This symbol marks a safety point, indicates caution, warning or danger. Ignoring this warning
may result in an accident to you or others. To limit the risk of injury, fire, or electrocution, always
follow the listed recommendations.
WARNING!:To reduce the risk of injury, the user must read the instruction manual. Before any
use, consult the appropriate section in this manual.
Double insulation symbol, class II: It is not necessary to connect the battery charger to a
grounded power source.
It complies with the relevant European regulations.
The crossed-out wheelie bin symbol indicates that the item must be disposed of separately from
household waste. The item must be handed in for recycling in accordance with local
environmental regulations for waste disposal. By separating a marked item from household
waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize
any potential negative impact on human health and the environment.
5 Mechanical speed selector.
6 Rod connection interlock.
7 Mixer rod.
8 Battery charger.
WARNING: Always wear eye protection, ear protection, dust mask,
and gloves when working with the machine.
19