Makita HML01 Manual De Instrucciones página 12

TROUBLE SHOOTING
Before asking for repairs, first, conduct your own
inspection. If you find a problem that is not explained in
the manual, do not attempt to dismantle the tool. Instead,
ask Makita Authorized or Factory Service Centers,
always using Makita replacement parts.
Malfunction status
Mower does not start.
Motor stops running after
a little use.
It does not reach maximum
RPM.
Cutting tool does not rotate:
stop the machine immediately!
Abnormal vibration:
stop the machine immediately!
Cutting tool and motor cannot
stop:
Remove the battery
immediately!
012350
Cause
Battery cartridge is not installed.
Battery problem (under voltage)
The lock key is not inserted.
Battery's charge level is low.
Cutting height set is too low.
Battery is installed improperly.
Battery power is dropping.
The drive system does
not work correctly.
Foreign object such as a branch is
jammed near the blade.
The drive system does not work
correctly.
Blade is imbalanced, excessively
or unevenly worn
Electric or electronic malfunction.
12
Action
Install the battery cartridge.
Recharge the battery. If recharging
is not effective, replace battery.
Insert the lock key.
Recharge the battery. If recharging
is not effective, replace battery.
Raise the height.
Install the battery cartridge as
described in this manual.
Recharge the battery. If recharging
is not effective, replace battery.
Ask your local authorized service
center for repair.
Remove the foreign object.
Ask your local authorized service
center for repair.
Replace the blade.
Remove the battery and ask your
local authorized service center for
repair.