Descargar Imprimir esta página

SG Group MG3000i Instrucciones De Uso página 56

Publicidad

Idiomas disponibles

Idiomas disponibles

Pull softly again until you notice slight resistance, now allow the rope to coil
back and pull vigorously to start up the engine.
Allow the rope to coil slowly without hitting the equipment. If you were unable to
start up in the first try, repeat the operation.
NOTE: If you reach the end of the rope length abruptly you could damage
the handle or rope spring and it wouldn't be covered by warranty.
NOTE: Do not let go of the handle after pulling to prevent the handle from
hitting the machine. Move your hand along with the handle until it has coiled
back completely.
6 Once the engine is started wait for a few seconds and then pass the choke
to left (air intake open). The engine will begin working stably and is ready to
have equipment plugged in.
NOTE: If the generator stops and doesn't start again, first verify the oil
level.
NOTE: Do not leave the choke in an intermediate position, the blend would
be too rich and the engine would not work properly.
53

Publicidad

loading

Productos relacionados para SG Group MG3000i