Publicidad
Idiomas disponibles
Idiomas disponibles
Selecting the Sound Mode
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either "DUAL-I" or "Stereo", depending on the
current transmission.
Easy Setting
1
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select Dual I-II.
Press the ◄ or ► button to select the required option.
NICAM
Stereo
A2
Stereo
➢
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs, switch to Mono.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program
without disturbing other people in the room.
➢
When you insert the head set jack into the corresponding
port, you can operate only "Auto Volume" in Sound menu.
➢
Prolonged use of headphones at a high volume may
damage your hearing.
➢
You will not hear sound from the speakers when you connect
headphones to the TV.
➢
The headphone volume and TV volume are adjusted
separately.
BN68-01528A-Eng.indb 26
(depending on the model)
Type of broadcast
Regular broadcast
(Standard audio)
Regular + NICAM Mono
NICAM Stereo
NICAM DUAL-I/II
Regular broadcast
(Standard audio)
Bilingual or DUAL-I/II
Stereo
English -
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode
Sleep Timer
SRS TS XT
Energy Saving
Dual I-II
Move
On-screen indication
Mono (Normal use)
NICAM
NICAM
stereo
NICAM
NICAM
dual-1
dual-
Mono (Normal use)
Dual I
Stereo
Tools
: Standard
: Custom
: Off
: Off
: Off
◄ Mono
►
Adjust
Exit
Mono
(Normal)
Mono
(Normal)
Mono
(Normal)
Dual II
Mono
(Forced mono)
TV Side Panel
2008-04-18 오후 1:44
Publicidad
