24
D
ELAY START (RESERVATION) Wash
DELAY START (RESERVATION)Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
1
Press thePOWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select the washing program.
3
Press the DELAY START(RESERVATION) button.
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
6
Close the lid.
Finish
NOTE
• Finishing time can be delayed from 3~48 hours. Delaying from3~12 hours can be done in 1 hour time intervals
and from 12~48 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning
program . (The laundry will be wrinkled if left for a long time after spinning.)
• Select the program for laundry on the Control panel. This
program will not work in WOOL and TUB CLEAN
Program.
• The light will 'DELAY' turn on and 'TIME LEFT'
will be marked.
• Press the button repeatedly to set the desired finishing time.
For example, To finish washing in 9 hours from now, by
make the number 9:00 pressing the DELAY START
(RESERVATION) button repeatedly.
(RES.=DELAY)
• The appropriate quantity of Detergent marked next to the
WATER of WATER•DETERGENT.
• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid
• When you press the START/PAUSE button the light will
blink.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.
• The washing will be finished according to the delayed time.