Remote Control Functions - Dirna bycool 950 Manual Del Usuario

950
EN

Remote Control Functions:

1
Unit On / Off
Note: when this Key is pushed, the unit starts in
automatic mode F4
2
Blower speed control
Note: while the unit is working in automatic mode F4 if the
user press this key,
This allows the user to choose the desired air flow by
pushing this key and the following symbols will appear on the
display: V1, V2, V3, V4, V5, V4, V3, V2, V1
3
Temperature control
The comfort temperature is controlled by briefly pressing the
27 ºC - 59/80º F)
To release the remote control; with the unit stopped, keep pushed the key
control panel. The symbol C
blinking, push the On/ Off key before 30 seconds and the unit will emit an acoustic signal.
In case this does not happen, this operation will need to be repeated from the beginning.
In order to deactivate remote control, push key
display. Once it stops flashing, push key
seconds or else you will have to repeat the whole operation.
Remote control
the unit will change the working mode to manual F0.
To release the remote control
will appear blinking in the display. When this symbol stops
How to deactivate remote control
10
.
of control panel until C
on panel. You will have to do it within 30
dirna
, s.a.
1
3
2
keys (15/
from the
flashes on