Samsung RF24J9960S4 Manual Del Usuario página 24

Chef Pantry
( 3 )
Chef pantry will change to Fish/Meat or
Fridge Mode automatically depending
on the set fridge temperature.
The Fish/Meat Mode lets you store fi sh
and meat at their freshest for a short
period of time.
To store fi sh or meat for longer, put it
into the Cool Select Room and select
the "Freezer" or "Soft Freeze" functions.
Chef
• If you set the fridge temperature to
Pantry
34~36 °F, the Chef Pantry changes
to Fish/Meat Mode and the Fish/
Meat icon lights.
The Chef Pantry is set to 30 °F
(-1 °C) in the Fish/Meat mode.
• If you set the fridge temperature to
37~44 °F, the Chef Pantry changes
to Fridge Mode and the Fridge Icon
turns on.
CoolSelect
( 4 )
(Hold 3 sec for Reset Filter)
• The CoolSelect button lets you set
the Cool Select Room on the bottom
right of your refrigerator to one of
four settings: Freezer, Soft Freezing,
Chill, or Cool. Each time you touch
the button, the setting changes.
• The CoolSelect button also lets you
reset the water fi lter life indicator.
After you replace the water fi lter,
touch and hold this button for 3
seconds to reset the water fi lter life
indicator.
Select Freezer to set the Cool Select
Room to the same temperature as the
freezer.
Freezer
• Use this setting to keep frozen food
fresh.
• Select Soft Freeze to set the
temperature in the Cool Select
Soft
Room to 23 °F (-5 °C) .This feature
Freeze
helps keep meat and fi sh fresh
longer.
DA68-03013A-13.indb 24 DA68-03013A-13.indb 24
All manuals and user guides at all-guides.com
Chill
Cool
Energy
Saving
English - 24
• Select Chill to set the temperature
of the Cool Select Room to 30 °F
(-1 °C).
• Select Cool to set the temperature
of the Cool Select Room to 41 °F
(5 °C). You can keep water, juice,
soft drinks, beer, etc. cold.
Filter
Water fi lter usage
This icon lights when you need
to change the fi lter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months).
The icon will blink red for several
seconds when you open or close the
door.
After you install the new water fi lter,
reset the fi lter indicator by touching and
holding the CoolSelect/hold 3 sec for
Filter Reset button for 3 seconds.
• If water is not dispensing or
dispensing slowly, you need to
replace the water fi lter because the
water fi lter is clogged.
• Some areas have large amounts of
lime in their water, which causes the
water fi lter to clog more quickly.
Energy Saving
( 5 )
(Hold 3 sec for °C↔°F)
Touching this button turns Energy
Saving mode on and off. When you turn
Energy Saving on, the Energy Saving
icon lights.
Turn Energy Saving off and the icon
goes off. The Energy Saving function is
set to "ON" in the factory.
If condensation or water drops appear
on the doors, turn the Energy Saving
mode off.
This button also lets you switch the
temperature displays between °C and
°F. Touch and hold this button for 3
seconds to switch the temperature
units between °C and °F.
2015. 8. 26. 2015. 8. 26. 10:29 10:29