Axkid SPINKID Manual De Instrucciones página 15

Installing Axkid SPINKID car seat in the vehicle
1
Fold down the support leg (P).
2
Release the front brace (H) with the release button (I) and fold the front brace towards the seat.
3
Push the ISOFIX buttons (T) and extend the ISOFIX connectors (U) into their outmost positions.
Grab the front brace (H) and the seat base (O) with the other hand and lift the Axkid SPINKID car seat into your vehicle.
4
Push the ISOFIX connectors (U) into the ISOFIX connection points in the vehicle until you hear a click
and the ISOFIX button indicators (T) turn green. Release the front brace (H) with the release button (I) and fold the front
brace towards the vehicle seat. Push the car seat as far as possible towards the vehicle seat. The front brace (H) should
be firmly pressed against the vehicle seat.
Lift the car seat upwards and push the support leg button (Q). Pull the support leg (P) downwards until it is in contact
5
with the vehicle floor. Let go of the support leg button (Q) and further extend the support leg (R) until you hear a click.
The support leg (P) should now be locked and firmly pressed against the vehicle floor.
Note: The support leg is equipped with a visual indicator (R) that will turn green when the support leg is firmly pressed against
the floor, indicating a correct installation.
15 15
EN