Grandstream GWN7662 Guía De Instalación Rápida página 3

OVERVIEW
EN
The GWN7662 is a Wi-Fi 6 (802.11ax) access point ideal for small-to-
medium sized businesses, home offices, retail shops, restaurants and
more. It offers 4x4:4 MU-MIMO technology on the 5G band and 2x2:2
MU-MIMO on the 2.4G band as well as a sophisticated antenna design
for maximum network throughput and expanded Wi-Fi coverage range.
To ensure easy installation and management, the GWN7662 uses a con-
troller-less distributed network management design in which the control-
ler is embedded within the product's web user interface. The GWN7662
is also supported by GWN.Cloud and GWN Manager, Grandstream's free
cloud and on-premise Wi-Fi management platform. It is the ideal Wi-Fi
AP for voice-over-Wi-Fi deployments and offers a seamless connection
with Grandstream's Wi-Fi capable IP phones. With support for advanced
QoS, low-latency real-time applications, mesh networks, captive portals,
256 concurrent clients per AP and dual Gigabit network ports with PoE/
PoE+, the GWN7662 is the ideal Wi-Fi access point for medium wireless
network deployments with medium user density.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperatures outside range of -10 °C to
45 °C for operating and -30 °C to 60 °C for storage.
• Do not expose the GWN7662 to environments outside of the follow-
ing humidity range: 5-95% RH (non-condensing).
• Do not power cycle your GWN7662 during system boot up or firm-
ware upgrade. You may corrupt firmware images and cause the unit
to malfunction.
PACKAGE CONTENTS
1x GWN7662 Access Point
3x Screw
(PM 3 x 50)
1x Ceiling
1x Mounting
Bracket Mounting Bracket
3x Screw
3x Plastic Expansion
(PA 3.5 x 20)
Bolt
~1~
1 x Quick Installation Guide
3x M3 NUT
GWN7662 PORTS
Port Description
NET/POE Ethernet RJ45 port (10Mbps /100Mbps /1Gbps
2.5G /2.5Gbps) supporting PoE/PoE+.
NET/POE Ethernet RJ45 port (10Mbps /100Mbps /1Gbps) to your
1G router or another GWN76xx, support PoE/PoE+.
RESET Factory reset button.
Press for 7 seconds to reset factory default settings.
POWERING AND CONNECTING THE GWN7662
GWN7662 can be powered on using PoE/PoE+ switch using following
steps:
Step 1: Plug a RJ45 Ethernet cable into the network port of GWN7662.
Step 2: Plug the other end into the uplink port of the power over Ethernet
(PoE/PoE+) switch.
Network Port
HARDWARE INSTALLATION
GWN7662 can be mounted on the wall or ceiling, Please refer to the
following steps for the appropriate installation.
~2~
RJ45 Ethernet Cable
to power over Ethernet
(PoE/PoE+) Switch