West Marine VHF550 Manual Del Usuario página 51

Installing the Hardware
Setup
1. Display.the.menu.and.choose.the.Setup.sub-menu.
2. Select.WHAM.and.then.Base ID..The.radio.displays.any.previously-
entered.base.ID.code.
Use the
3.
the.four.digits;.the.
CHANNEL DOWN
When the first digit is correct, press the
4.
moves to the next digit. Enter the remaining three digits of the base
ID.code.in.the.same.way.
When the base ID is correct, press and hold the
5.
two seconds. The radio saves the base ID and returns to the WHAM
screen. To cancel without saving, press the
time.during.your.entry.
From.the.WHAM screen, select Link Ch..The.radio.displays.the.
6.
current WHAM channel setting.
Use the
7.
the available channels. When you see the channel you want on the
display, press the
The radio saves the new WHAM channel setting and returns to the
8.
WHAM screen. To cancel without saving, press the
any.time.during.your.entry.
WHAM
CHANNEL UP .and. CHANNEL DOWN
CHANNEL UP
.button.decreases.the.number..
CHANNEL UP .and. CHANNEL DOWN
SELECT .button.
E-48
Base ID
id 0001
Use the
CHANNEL UP
buttons to change each
DOWN
of the four digits in turn.
buttons to change the first of
.button.increases.the.number.and.the.
SELECT
H/L/MENU
.buttons.to.scroll.through.
&
CHANNEL
.button..The.cursor.
SELECT
.button.for.
.button.at.any.
H/L/MENU .button.at.