Stiga MPST 84 Li 48 V1/V2 Manual De Instrucciones página 74

• Dual sound indication: missing grass catcher.
4. Continuous sound indication: grass catcher full:
5. Single sound indication: no reverse gear cutting permis-
sion. See icon fig. 13.C.
6. Repeated intermittent signal: the key is inserted but the
machine has not been started within a few minutes of
its insertion.
• Grass catcher tipping lever (if available)
This lever, removable from its seat, allows the grass catcher
to be overturned for emptying, reducing the effort required
by the operator (fig. 12.E).
• Pushbutton panel type "I"(Fig. 12.C)
Machine start button
With the key fully inserted (fig. 12.A), this
button (fig. 13.A) turns the machine ON and
enables all functions.
IMPORTANT If all safety conditions are met,
the "READY" (fig. 13.K) icon comes ON and
the machine is ready to be used.
Cutting means engage and disengage
pushbutton
Reverse gear cutting enable button
Holding down the button fig. 7.C gives
consent for reverse mowing.
Beacon ON button
Attention icon
Battery LED
"Ready" icon
The icon in fig. 13.K is illuminated when
the machine is ON and ready to be used.
"Bluetooth" icon
Controller and/or motor over-temperature
icon
Transmission engagement / disengagement
lever icon
Operator on-board icon
Emergency pushbutton icon
• Pushbutton panel type "II" (Fig. 12.D)
There are the following buttons and icons, in addition to the
pushbutton panel of type "I".
"CRUISE CONTROL" button
To disengage the device and reset speed
control using the drive pedal (fig. 12.F)
simply:
press the button fig. 13.G.
or
press the drive pedal (fig. 12.F).
Cutting means operating speed selector
button
ECO
NORMAL
BOOST
ECO icon
BOOST icon
• Pushbutton panel type "III" (fig. 12.L)
There are the following buttons and icons, in addition to the
pushbutton panel of type "II".
Cutting height adjustment buttons
Grass catcher open / close buttons
Battery LED
Raised grass catcher symbol
Cutting height symbol
Percentage of battery charge
Current absorption indicator
• Bluetooth function
1. Download the App using the QR Code shown in fig. 29.
2. Follow the instructions.
EN - 5