Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
EN
Package Contents:
MilkSPA™ Breast Milk & Bottle Warmer
2x Storage Caps
Instruction Manual
Specifications:
Nominal voltage: 120VAC/60Hz 1000W
WARNING: Read the ENTIRE instruction manual to become familiar with the features of
the product before operating. Failure to operate in a safe and responsible manner could
result in damage to the product or personal property and cause serious injury. A copy of
these instructions is also available online at drbrownsbaby.com/customer-support
IMPORTANT SAFEGUARDS
WHEN USING ELECTRICAL APPLIANCES, PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO
PERSONS, INCLUDING THE FOLLOWING:
• Read all instructions.
• Ensure that the wall outlet voltage matches the voltage of the appliance.
• Do not operate appliance after it malfunctions or has been damaged in
any manner. Return appliance to the nearest authorized service facility for
examination, repair or adjustment.
• If the supply cord or plug is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified person in order to avoid hazard.
• Place appliance on a level, heat-resistant surface.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not let cord hang over the edge of a table or counter, or touch hot surfaces.
• DO NOT IMMERSE IN WATER.
• HOUSEHOLD USE ONLY.
• Do not use outdoors.
• Unplug from outlet when not in use and before adding water.
• Do not spill liquid on cord or plug.
• Do not move appliance while in use or when it contains hot liquids.
• To operate, plug cord into wall outlet. To disconnect, ensure the unit is off, then
remove plug from wall outlet.
• DO NOT touch hot liquid and heating surfaces, including the heating
element, during or immediately after use. Use handles or knobs.
• Allow to cool before checking water level.
• Never freeze glass containers, as glass may break.
• Before feeding, pour a few drops of contents from bottle onto the back of your
hand to test the temperature.
• Food should not be heated for too long.
• Always test content temperature before feeding your baby.
• Allow to cool before putting on or taking off parts.
• Unplug from outlet and allow to cool before cleaning and descaling the unit.
Publicidad
