Publicidad
Idiomas disponibles
Idiomas disponibles
USING YOUR WARMER
CAUTION: Unplug from outlet before adding water.
1. Unlock warming chamber by twisting counterclockwise and lifting from base.
2. Add DISTILLED water to line ABOVE the "FILL" text on inner rim, indicated by the
MAX arrow – approximately 9.5 oz / 280 mL of water.
Note: If water is at or below "FILL" text, indicated by the MIN arrow, the unit may make
bubbling sounds indicating water should be added soon.
WARNING: Allow to cool before checking water level.
3. Place warming chamber onto base, aligning arrow with unlock symbol (on the back of the base)
and twisting clockwise to align arrow with lock symbol. Insert gray warming basket. Plug unit in.
4. Place vessel into warming chamber as outlined below.
BOTTLE: Remove bottle components and add storage cap for leak-free
warming. Place into warming basket. When warming items that are too
large for the basket, warming water may overflow.
BREAST MILK STORAGE BAG: Breast milk storage bags are
available in a variety of sizes. Frozen bags can also be in a
variety of contorted shapes, depending on the freezing
condition. Remove warming basket and place bag directly
into warming chamber. See "Warming Time Charts"
on page 4-5.
Note: Use of the warming basket will raise the water level and speed
the time in which the milk will warm. Overheating of the milk may result.
SETTING WARMING TIME
CAUTION: ALWAYS TEST CONTENT TEMPERATURE BEFORE FEEDING YOUR BABY.
5. Press any button to turn appliance on.
Vessel Type
Starting
Temperature
Condition
Volume/
Units Selection
To change between oz and mL, hold the
button for three seconds.
Up
Power/Start
Down
Publicidad
