Publicidad
Idiomas disponibles
Idiomas disponibles
Standard KVM Switch Rack-Mount
Instructions
1. Depending on whether you want to mount the KVM switch to the front
or back of the rack, attach the included rack-mount brackets to the
front or rear side of the KVM switch.
2. Using user-supplied screws, mount the rack-mount brackets of the
KVM switch to the rack.
Standard Console KVM Switch
Rack-Mount Instructions
The B040-Series Console KVM Switches come with removable rack-
mount brackets, allowing the unit to be installed by a single person.
1. Remove the rack-mount brackets from the unit and mount them to the
back of the rack using user-supplied screws.
2. Take the Console KVM Switch and gently slide it into the rack so that
it slides into the rack-mount brackets you just mounted.
3. Mount the rack-mount brackets on the front of the unit to the rack
using user-supplied screws.
2-Post Rack Console KVM Switch
Rack-Mount Instructions
The B040-Series Console KVM Switches can be mounted to a
2-post rack using Tripp Lite's B019-000 2-Post Rack-Mount Kit
(sold separately). See the B019-000 owner's manual for installation
instructions.
2
Publicidad
