Introduction
The Quick Installation Guide is applied to the JetNet 5018G Series. The JetNet 5018G series
include JetNet 3018G, 16+2G Gigabit Switch; JetNet 5012G, 8+4G Industrial Managed
Switch; JetNet 5018G, 16+2G Industrial Managed Switch and JetNet 4518, 18-port Managed
Fast Ethernet Switch.
Model Name
10/100 Base-TX
JetNet 3018G
16
JetNet 4518
18
JetNet 5012G
8
JetNet 5018G
16
Additional model names, latest introductions and product datasheets can be found in Korenix
Web and Catalogue. The JetNet 5018G Series is designed as rugged surface in aluminum
material and with wide operating temperature. The managed switches' software supports full
L2 management features, ring redundancy, network control, security and alert features. The
managed switches also support RS-232 console for out of band management.
Hardware Installation
1. Unpack the box, you will find
4JetNet Industrial Switch
4Quick Installation Guide
4CD User Manual
4Wall Mount plate and Mounting kit
4Ethernet port protective caps
4RS-232 Console Cable (Managed Switch only)
2. Mounting the unit
You can mount the din-rail clip on the rear of JetNet
switch on the DIN rail.
10/100/1000 Base-T
100 Base-FX
2 (Combo with SFP)
2 (Combo with Port 17,18)
2 (Combo with SFP)
2 (Combo with SFP)
1000 Base-X SFP
2
4 (2 Combo + 2 SFP)
2