Stanley FATMAX FME190 Manual De Instrucciones página 6

ENGLISH
c. Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power
tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power
tool accidentally.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e. Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tools operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to
be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
h. Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
5. Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
6. Mixer safety instructions
a. Hold the tool with both hands at the intended handles.
Loss of control can cause personal injury.
b. Ensure sufficient ventilation when mixing flammable
materials to avoid a hazardous atmosphere.
Developing vapour may be inhaled or be ignited by the
sparks the power tool produces.
c. Do not mix food. Power tools and their accessories are
not designed for processing food.
d. Keep the cord away from the working area. The cord
may be entangled by the mixer basket.
e. Ensure that the mixing container is placed in a firm
and secure position. A container that is not properly
secured may move unexpectedly.
f. Ensure that no liquid splashes against the housing of
the power tool. Liquid that has penetrated the power tool
can cause damage and lead to electric shock.
6
(Original instructions)
g. Follow the instructions and warnings for the material
to be mixed. Material to be mixed may be harmful.
Additional power tool safety warnings for paddle
mixer.
Never clamp the product into a vice or to a work bench to
u
use as a stationary tool. This may cause serious injury.
Switch the product off immediately if the tool attachment
u
jams. Be prepared for high reaction torques, which could
cause kickbacks. The tool attachment will jam if the
product is overloaded or becomes twisted in the
workpiece.
Wear protective clothing, dust masks and protective
u
gloves when using this product. While this product is
being used, dust may be created or splashing may occur
and material or liquids may be flung around. Many types
of dust are deemed to be carcinogenic.
Always operate the product with both hands on the
u
handles. Keep a firm grip on the handles and ensure your
footing is secure on a stable, level and dry ground. Loss
of control over the product can cause personal injury.
Do not use this product to process substance which is
u
highly flammable or potentially explosive such as solvents.
Using this product will create sparks which can ignite
vapours.
Use this product indoors only. Moisture and rain can
u
damage the product or can lead to electrocution.
from the power supply, if stirred material penetrates into
the inside of the product or if the product falls into the
material being stirred. Have the product inspected by a
professional electrician. Stirred material and moisture
can damage the product or lead to electrocution, if they
penetrate inside the product.
Do not work with any substances which are harmful
u
to health. Many materials are noxious when they are
processed.
Do not breathe in any unhealthy substances and avoid
contact with your skin. Follow the manufacturers'
instructions and wear suitable personal protective
equipment.
Wait until the product has come to a complete standstill,
u
before removing it from the material being stirred and
putting it down. The bucket can get jammed or stirred
material can be flung around. This can lead to a loss of
control over the product.
Residual risks.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotating/moving parts.
u
Impairment of hearing.
u
Risk of injury when changing any parts, or accessories.
u