Publicidad
Device Setup
Clicking on Setup or Setting under the live view. It opens the Device setup
below.
This interface can differ a little bit depending on the use of iOS or Android.
All options are explained below.
Device Information
Device ID
Device type
Device version Current installed firmware version.
General settings
Device's WiFi
Enable audio
recording
Prompt
Device volume Set the volume for device play sound and alarm volume
Smart detection
The ID number of the device. This item cannot be filled
in. Device ID will be automatically configured according
to device type.
Shows the product number.
Change the WiFi of the device connection
Enable/Disable the microphone for video recordings or
two-way-talk.
- Enable/Disable the prompt tone of the device.
- Change the language according to user's needs. Voice
Prompt is mainly used for status information for the user.
- Smart detection: Enable/disable motion detection
alarm. When the alarm function (motion detection) of the
camera is triggered, the device will push the alarm
message to our server and then the server will push the
message to your Smartphone which bind push service
and receive alarm push.
- Humanoid detection alarm: Enable/disable the
Model: TX-192 Article No. 4991, 07/2022
20
Publicidad
