Descargar Imprimir esta página

Member's Mark Livingston SMWD-2 Instrucciones De Montaje página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

FURNITURE POWER DISTRIBUTION CENTER
IMPORTANT SAFETY INSTRUCTIONS
Carefully read all instructions installing and operating fixture
IF YOU HAVE ANY QUESTIONS REGARDING THE PROPER
INSTALLATION CONSULT A QUALIFIED ELECTRICIAN.
SHOCK OR INJURY TO PERSONS, PLEASE FOLLOW THE NEXT:
 Use only insulated staples or plastic ties (not included) to secure the cords.
 Route and secure cords so that they will not be pinched or damaged when the
desk is pushed up against the wall.
 Make sure cord is not pinched between desk and floor.
 Use the unit indoors only.
 Do not use an extension cord to connect this unit to a wall outlet.
 Use power strip with integral over-current protection to supply other electrical
devices or accessories in desk.
 This unit must be plugged into a properly grounded outlet.
 The socket outlet should be installed near the equipment and should be easily
accessible.
 Maximum load of connected equipment cannot exceed a total of 12 amps and
120 volts.
 Do not open or disassemble this unit for any reason.
SAVE THESE INSTRUCTIONS
Need Assistance? Visit us at: samsclub.com/membersmarkhelp
TO REDUCE THE RISK OF FIRE, ELECTRICAL
4 |
P a g e

Publicidad

loading

Este manual también es adecuado para:

Livingston smwd-2-e