Switching Bicycle Lights On/Off - Bosch SmartphoneHub CUI100 Instrucciones De Servicio

English – 4
– SPORT/eMTB:
SPORT: Powerful assistance, for mountain biking and
cycling in urban traffic
eMTB: Optimum assistance whatever the terrain, rapid
acceleration when starting from a standstill, improved dy-
namics and top performance (eMTB only available in
combination with the drive units BDU250P CX, BDU365,
BDU450 CX and BDU480 CX. A software update may be
required.)
– TURBO: Maximum assistance even at high pedalling
speeds, for sport cycling
To increase the assistance level, press the + (14) button on
the operating unit repeatedly until the desired assistance
level appears on the display. To decrease the assistance
level, press the – (11) button.

Switching bicycle lights on/off

On the model in which the lighting is powered by the eBike
system, the front and rear lights can be switched on and off
at the same time by pressing and holding the + button (14)
on the operating unit.
If the light is switched on, a symbol is shown on the display
or in the app.
Alternatively, the light can be switched on and off using the
app.
Switching the bike lights on and off has no effect on the
backlighting of the display.
1 270 020 XBC | (22.04.2020) Bosch eBike Systems