USAG 1613 AB12 Guía De Instrucciones página 5

1/ WARNING:
• The BOOSTER should always be used by skilled personnel.
• Warnings and instructions of the vehicle maker must be applied at all times.
• Wear protection goggles and equipment specified by regulations.
• Whenever left unused, the BOOSTER must be in charge.
• Always wind and store the cables properly to avoid any risk of contact between the clamps.
• Never produce short-circuits.
• Never use a 12 Volt BOOSTER on a 24 Volt vehicle.
• After-sales interventions must be performed only by USAG After-sales.
2/ SPECIFICATIONS :
Usage voltage
Max Peak current
Cranking current
TCFC current*
Battery capacity
Battery type
Cable Ø
Cable type
Cable length
Clips
Weight
Fuse type
Power fuse
Fuse reference
Voltage selection
Safeties
Charger type
INPUT charger
OUTPUT charger
EU charger reference
UK charger reference
1613 AB12
12V
3500A
1200A
620A
1 X 20 Ah
AGM
25mm²
Double insulation copper
155 cm
650 A Steel / Bronze
10,3KG
MEGA
300A
BF300A
No
Fuse
Automatic 2A
120-240 V 50/60 hz
DC 12V 2A
1613 ABR
Not available
EN