Publicidad
Idiomas disponibles
Idiomas disponibles
4) If these checks reveal any defects, contact your nearest dealer and ask to have
them repaired.
Air cleaner
1) Release the air cleaner cover and remove the dust.
2) If the element is dirty, clean it by tapping it or by blowing away the dirt.
3) If the element is bent or damaged, replace it.
4) After you have cleaned the element reattach it to the cleaner body with the
stamp on the outside (facing the cleaner cover).
5) After that, replace the cleaner cover.
Spark plug
To ensure proper engine operation, the spark plug must be properly gapped and
free of deposits.
1. Remove the spark plug cap.
2. Clean any dirt from around the spark plug base.
3. Use the socket spanner which provided to remove the spark plug.
4. Visually inspect the spark plug. Remove carbon deposits using a wire brush.
5. Check for discoloration on the top of the spark plug. The standard color should
be a tan color.
6. Check the spark plug gap. The acceptable gap should be between 0,6‐0,7mm.
7. Install /reinstall the spark plug carefully by hand.
8. Once the spark plug has been seated, tighten it with a spark plug wrench.
GB
13
Publicidad
