Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Press the Starting Temperature Condition Button until the
Sterilize icon appears. The appliance will default to 6:00.
7.
Press the Cycle Start Button.
WARNING: DO NOT open lid or reach over the appliance while in
use, as steam will cause burns and serious injuries. DO NOT touch hot
surfaces, including lid and interior parts, during use.
8. When the cycle is complete, the display will flash 00:00 for 60 seconds and then shut off,
allowing contents to cool slightly before removal.
CAUTION: Open lid by front tab and carefully remove contents by hand or
with lift-out basket. Beware of steam and avoid spilling or splashing water on
yourself when removing contents.
TROUBLESHOOTING
If the warmer is not operating, check that:
1. The power cable is connected to the power outlet.
2. Water has been added to the reservoir.
3. The appliance is correctly assembled.
4. If display shows the error "ERR-H2O," the warmer has low water condition. Unplug from
power. Fill water to the correct level. Reconnect to power.
Sterilize
Publicidad
